Connect the USB disk to your USB port on the ReadyNAS. If the USB disk is USB 3.0 compatible, then it is best to connect it to a USB 3.0 port on the ReadyNAS. Look into the hardware manual on your ReadyNAS to name which ports are USB 3.0 ports. When connected, the USB disk ought to appear under Program — Overview:
Should the USB disk will not appear, see Note 1 at the bottom of this article for troubleshooting suggestions.
(Optional) Head to System — Overview. Go through the gear icon beside the USB disk and press Format. Warning! This task will destroy the contents from the USB disk. Make sure copy the data from your USB disk initial
. If you should keep your data about the USB disk, don't proceed because of this step!
Choose EXT4 from your drop down menu and press OK. For optimum performance with ReadyNAS, we suggest you have EXT4 because the file System for the USB disk (see Note 2 at the foot of this information for additional details).
Wait for Format Complete show up inside the logs:
Head to Backup and press Add Backup:
Enter a name to the backup job:
From the left hand side of the backup configuration settings, pick out Neighborhood then press Browse. Its local because the Information we wish to save is «nearby» on the ReadyNAS.
Navigate through the directory structure from the ReadyNAS and choose the folder that you might want to backup. Then press Select:
Note: It's also possible to pick the entire Information volume as being the method to obtain the backup but understand that all snapshots also are backed up. When the snapshots reference a great deal of Information, then your destination device might not be adequate.
Inside suitable hand side in the backup configuration settings, decide on Nearby after which press Browse. It really is local since the USB disk is connected «locally» for the ReadyNAS.
Scroll into USB/eSATA Ports and then discover the USB port to which the USB disk is connected. In such a case, the USB disk is plugged into the USB port on the back of the ReadyNAS at the very top. Then press Select.
To be able to contain the USB disk cleanly ejected when the job is done (recommended), then choose the checkbox Auto eject device if your job is created and press Next.
In the next screen, set the schedule as needed:
Some widespread examples are below. Days in blue are enabled; days in gray are disabled.
Running the backup job Monday to Friday Following 7PM, the necessary configuration is:
Backup Every single: 24 hours
Time: 19:05 and 20:05
Repeat: Mon, Tue, Wed, Thu, Fri
To operate the backup job Every Saturday night Soon after midnight, necessary configuration is:
Backup Every: 24 hours
Time: 00:05 and 01:05
Note the time which the job is scheduled to own between is needed just to specify some time window in which the job is permitted to begin. Very easy result in the job will probably be stopped when it is still running when the period window expires. As soon as the job begins, it'll carry on and run until it can be prosperous or interrupted.
Decide to remove the contents on the backup destination just before full backup. This could be used with caution.
The backup button prompt appears. Select Yes if you need this backup job to perform in the event the backup button on the front from the ReadyNAS device is pressed (note this applies to ReadyNAS desktop units only and will not sign up for ReadyNAS rackmount units).
Run the flash drive backup solution
job by doing any kind of the following:
— Wait for your defined scheduled time for them to arrive.
— Press the backup button around the front with the ReadyNAS device (only applies to systems with a backup button
every time a job is assigned to your backup button).
— Run it manually by clicking the gear icon mitts and pressing Start off:
Note 1. In the event the USB disk is not detected because of the ReadyNAS, allow me to share some points you can go:
Connect the USB disk to the PC. Whether it is detected there, Try formatting it in NTFS or FAT32 and safely eject the USB disk just before connecting it towards ReadyNAS Once more.
Reboot the ReadyNAS.
Use another type of USB disk.
Note 2. A USB disk formatted in EXT4 file Program will not be detected by a Windows PC by default. To look at the contents with the disk from a Windows PC, you can connect the USB disk towards ReadyNAS and can get on via the ReadyNAS or you should use an EXT driver for Windows like www.ext2fsd.com/